Description:

Everbuild 502 All Purpose Weatherproof Wood Bonding Adhesive 

Everbuild 502 All Purpose Weatherproof Wood Adhesive is a high quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength, impact resistant bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Dries clear. Fast cure, initial set in just 10 minutes.

Conforms to the international standard EN 204 (D3) and BS 14256 for creep resistance

Wood Adhesive Benefits:

• Excellent rate of bond strength development.
• High degree of water resistance. D3 Classification- joints may be subject to short term water contact or exposure to high humidity.
• Interior/exterior use.
• Low timber staining characteristics - will not stain.
• Creep Resistant.
• Dries clear - contains no inert fillers.
• Water based - environmentally friendly/easy clean up.
• Suitable for radio frequency cure.

Wood Adhesive Uses:

• As a Weatherproof/creep resistant wood adhesive, internally and externally.

Wood Adhesive Limitations:

• Not suitable for continuous immersion.
• Ensure wood doesn’t contain excessive moisture (<15%)
• Do not use at temperatures below 10^oC.
• Note: drying time is extended at low temperatures.
• Clean excess adhesive off glue line after clamping before adhesive dries with a damp cloth.
• Sand off any excess adhesive before staining the wood.
• Ensure sufficient clamping pressure, especially important with radio frequency bonding.
• Use on Laminates: Only suitable for bonding small porous laminate strips. Do not use on non-porous or large areas of laminate. Use CONTACT ADHESIVE.
• EXTERIOR USE:  All glue joints must be protected with impervious paint system when dry.